Honeywell 235332 R24BA1006 "HtSeq2sw On1-20sec "HtSeq2sw On1-20sec

Heat Sequencer with two switches

Heat Sequencer with two switches - With regard to selection of control circuits for a fan, for large-scale ventilation and air conditioning work, the center-off (center positive) single pole switch is becoming more and more popular. It has the advantages of simple structure and reasonable price. We offer high-quality single pole switches in various specifications, including center-off, combination, push button and magnetic reed switches. They are widely used in air conditioners, fans and other fields.

The Heat Sequencer has two switch outputs that can be used to control instantaneous heat devices such as light bulbs, fans or heating elements. The Heat Sequencer allows you to run more than one device without having to install an additional panel.

The Honeywell Heat Sequencer (R24BA1006) helps you keep things nice and even while operating your electric baseboard heating system. It has two switch settings, and can operate for up to 1 20 seconds of on time with each switch.

The Honeywell 235332 R24BA1006 Heat Sequencer is a mechanical control that provides heating and cooling to a building. The device has two switches with which to control the on/off status of units and allows manual switching. The product is available in white.

The Honeywell Heat Sequencer has two independent 0-30 second heat on timers. One switch is wired with yellow to one terminal for the first part of the cycle and red wire to another terminal for the second part of the cycle. The other switch is wired one wire to a terminal for the first timer and a separate yellow wire to another terminal for the second timer. Includes mounting screws.

Honeywell's Heat Sequencer Controller is a master control device used for turning electrical power on and off to one or more heaters. It has two switches with large, clearly marked push buttons that provide visual and audible indication for switch contact status. These indicators permit remote monitoring of the switch contacts. The HSeq2sw-On1-20sec is designed per the National Fire Protection Association's Standard 21.

The Honeywell R24BA1006 Heat Sequencer allows the selection of any choice of 4 different 6 watt heaters for infinite combinations. The switch will beep twice to confirm selection. This is used in conjunction with a Honeywell RTH230B thermostat with a heat pump or forced air application (not included). It is also used with an older thermostat, where a jumper must be installed inside the unit to control heat pump applications and with an older programmable thermostat where a jumper must be installed inside to control steam applications (not included).