Honeywell 2552 DPDT RELAY 1)12AMP & 1) PILOT DUTY,

DPDT RELAY 1)12AMP & 1) PILOT DUTY,

Most Honeywell 2552 DPDT RELAY 1)12AMP & 1) PILOT DUTY,

This 12 AMP / 14 VAC coil relay has a normally-open (NO) SPDT snap action switch, with a pilot duty of 120 mA. It is designed for use in industrial automation and telecommunications equipment.

Pilot Duty, Coil Voltage Nominal:12V, Coil Current : 1.5A, Base Number:2PDT, Contact Form :PDT , Contact Ratings :12A@250VAC, Insertion and Withdrawal Life:0.5Million Cycles, Dielectric Strength:2500VDC, Control Circuit Emulation Polyswitch Function , Electrical Life:30000 Cycles

The Honeywell RPLS230D 1-to-2 Wire DC Motor Controllers has a compact, low bilateral symmetry DPDT relay and provides a switch control rating of 1.2 amps at 30 VDC. It is rated for 120/240 VAC excitation and regulated output voltage range of 0 - 50 VDC when energized by 24VDC or 30VDC source.

The Honeywell 2552 is an SPST momentary and pilot solenoid coil with a silver clad aluminum oxide contact. Its medium size relay head measures 2 inches in diameter, with a 16 inch lead wire. The head can be wired to accommodate insulation displacement connections, but this will require a crimp type terminal connector. This air powered relay has an operating voltage of 12 VDC, and a switching current draw of 1 amps. It was designed for pilot duty applications that require moving contact action with a momentary on pilot signal of 5-200 mAmp. The 2552 is installed into an enclosed 24 amp circuit

The Honeywell 2552 DPDT relay is a contactor-type relay that provides reliable switching of current in applications such as positive stop and limit controls. It tolerates transient voltages up to 150 volts, and its terminals accept 20-24 AWG wire. The 2552 DPDT relay is suitable for a wide range of applications including switching of low-voltage lamps, solenoid coils, or exhaust fans.

The WH-2552 series wire-wound relay provides contact ratings of 5 amps at 120/240 VAC.