RHEEM 42-25104-01 -Ruud 24V SPST Relay 24V SPST Relay

Relay - SPST (24VAC Coil)

The SPST 24VAC Coil Relay is compatible with the following Rheem, Ruud, and Eldorad brand models: select RTG Series, RTL Series, Hydro 2.0+ 2.5+ Series, Heat Pump (HP) Series HPVR Series, LTX14-100B , LVU , XVU , List of models as well as specifications is available on this site

The RHEEM 24V SPST Relay is used in Ruud units with a 24VAC coil. The relay is 12" long and has mounting ears on each end on the relay for mounting into the unit.

The RHEEM 24V SPST Relay is a Genuine Original Equipment Manufacturer (OEM) part made to their exact specifications. This is a relay that controls a compressor's start up and stop using an electrical solenoid.

The Ruud 24V SPST Relay is used to turn the power on or off to selected electrical appliances. Turning the power off will stop all functions of the appliance currently in use.

When ordering a Relay, it is important to know the application that needs to be "controlled". This means knowing if it has many circuits that are switching at the same time as well as what type of device (load) will be switched on and off. Always order a relay with more capacity than necessary, but not too much. Call us at 1-800-508-4673 for relays not listed on this site.

This product is a 24V relay that can be used for different things such as switching 24V loads or just to use as a solid state switch in circuits where you don't want any electrical arcing. This is also useful to use a SSR in place of a mechanical relay. It has an operating range of -40 to 185 °F (-40 to 85 °C)

RHEEM 42-25104-01 is a 24VAC relay rated at .1A, and has 2 terminals for your electrical connections.