Honeywell 35321 120V PRIMARY CONTROL WITH INTERMITT

120V PRIMARY CONTROL WITH INTERMITT

The Honeywell 35321 120V PRIMARY CONTROL WITH INTERMITT is a Primary Control used in IAQ Primary Control Systems. Its use is in mold/mildew control applications that are for above ground systems.

Designed for use by both residential and commercial installers, the 35321 Primary Control with Intermittent is an ideal solution for Control-Air-Design (CAD) applications. Designed to fit in a standard single-gang box, its two internal thermostats allow precise temperature control and scheduling for comfort systems, while easy installation and commissioning allow it to be erected swiftly in a new system or retrofitted into an existing system.

The 35321 is a 120/240V primary control intended for use with air-activated terminal units and a variety of Honeywell combination controls. It allows reductions in on/off times while increasing intermittencies.

The Honeywell 35321 primary control combines a wired primary control and wireless intermit t to provide energy saving convenience for your home. This 120 volt control features an integrated LED display window that indicates the current power consumption in watts, as well as shutoff delay time and status. It is designed specifically for use with 18000B, 27000B and 34112B 5000/6000W Whole House Surge Protectors.

The Honeywell 35321 120V Primary Control is a 3-wire primary control that combines the features of a sealed motor protector (SPD) and absorbent glass mat (AGM) battery in one convenient device. Primary Controls protect against short circuits in series mains-voltage motors and start or "kick-off" type overloads.

The Honeywell 35321 120V Primary Control has been designed to control Tempra electric water heaters that utilize an electric primary element. If you notice any unusual bubbling sounds or fluctuation in water temperature that can't be attributed to a thermostat problem, this may be your solution.

The Honeywell 35321 120V Primary Control is a miniature, single-gang primary control for the 3550 Series Fan Coil. The control accepts 120V nominal on-off control voltage (24V nominal when used with a 24V thermostat) and is housed in a 7/16" NPT enclosure. The 35321 has an ambient operating range of 14° to 122°F (–10° to 50°C), non-operating 0° to 140°F (–18° to 60°C).