ROBERTSHAW 331569 SPDT 3 Lead Electronic Pilot Burner Assembly With Switch for Carrier, Bryant & Payne 1

SPDT 3 Lead Electronic Pilot Burner Assembly With Switch for Carrier, Bryant & Payne 1

This pilot relight kit is designed to work with the following single-stage gas furnace control board models: N8A, H8B, N8A-C, H8B-C and the N7B-NA

24/120 VAC operating voltage

Its compact size makes it easy to install

Easy to install: No electrical panel or wiring changes required

This pilot relight kit is necessary when a gas valve will not auto-light after power interruption or during power transition from one voltage to another

This is a 24/120 VAC Automatic Pilot Relight Kit for carrier 5733

The 5733 Carrier Automatic Pilot Relight Kit is a low voltage relay that may be installed in 24 or 120 volt systems to relight the pilot in the event of an automatic pilot failure

For use with Robertshaw 5733 and 5754 electric water heaters, series 5700 and 5800 gas water heaters

This product is ideal for use in any 24-volt or 120-volt system

This prevents the pilot from going out due to dirty, blocked or misadjusted gas valve

The Robertshaw 5733 Carrier Automatic Pilot Relight Kit is a 24VAC automatic pilot relight system

The kit includes the pilot light and flame sensor assembly, along with all parts needed for installation

The Carrier Automatic Pilot Relight Kit automatically relights a gas appliance pilot assembly in the event of low gas pressure

The Robertshaw 5733 Carrier Automatic Pilot Relight Kit is available in 24, 120 and 277 VAC models

This automatic relight kit comes complete with all pilot assembly parts required for a complete pilot replacement, including orifice cartridge and automatic pilot cable

It has a built in Safeguard Switch that monitors the burner flame and automatically shuts off power to the motor if flame goes out

This automatic pilot relight kit includes an automatic ignition device

Reduces resetting time by 90%

Two year warranty

The Robertshaw 5733 Carrier Automatic Pilot Relight Kit is perfect for the heating contractor who is looking for a quality replacement to their old or damaged part

It comes with a 2-year warranty and is made in the USA

It can be used with gas and oil heaters to keep your home warm during the cold winter months

It can also be used to ignite a pilot that has been shut off

The R5733 is a Carrier replacement automatic pilot relight kit

Contact us for more information about this product!

The relay is designed for use with Carrier Type B and D control valves

The unique pilot flame sensor provides one-step installation and mating to the existing automatic pilot

The 5733 Carrier Automatic Pilot Relight Kit is made by Robertshaw, a leader in the HVAC industry for over 110 years

Provides automatic pilot resets after power interruptions

The kit contains hardware and instructions for mounting the transformer to the wall plate in an accessible location near the appliance

The R5733 has been UL listed for use in gas furnace systems

It is used to automatically relight a gas furnace when there is loss of gas to the unit due to low flame

The Automatic Pilot Relight Kit is used with natural or propane gas appliances and includes a miniature solenoid valve, 24 VAC transformer, pilot-on indicator light, automatic and manual reset safety switch and wall-switch override key switch

The ROBERTSHAW 5733 Carrier Automatic Pilot Relight Kit is a 24/120 VAC pilot relight assembly kit for use with the 5700-CUSR and 5800-CZMX gas valves