CAP,RUN DUAL,45/5MFD,440V,ROUND
York CAP, RUN DUAL, 440 VAC, 45/5 MFD
The York 72B series dual cap run capacitor 450 volt 45/5 mfd 440 volt features the following
characteristics: the voltage range from 4.80 to 261.40 volts, a maximum discharge current of 112.7 amperes and a capacitance of 35 mfd at 72 hertz.
Able to run most circuits, the 440V 45/5MFD RUN DUAL cap is used in almost all residential electrical service wiring. It features an EMT body with 2 threaded projections with set screws for installation, and a molded-on...
The York dual cap is rated for up to 45/5 MFD at 440 Volt. It has a round case construction, for use for panel board mounted or stand alone applications.
Cap,Run Dual,2P,450V,40A
The York 4-leg 142574 S1-024-25120-700 is a 480 volt, 3 phase, 25 amp unit that has a MFD of 45/5 and comes with a round run capability. This capacitor features a 50% duty cycle, an end mounting base and .4 kv capacitor voltage. The capacitors case is steel plated for excellent corrosion resistance and resistance to chemicals. The end mounting base provides ease of installation and the capacitance value is etched on the capacitor for easy identification.
A dual run, round, 440 VAC, center tapped primary capacitor rated 45 mfd/440 VAC.
This capacitor is a radial leaded, molded case construction with dual terminals per phase. The capacitor construction shall consist of a single molded case with leads formed integrally in the body. The insulating is UL167 H-rated per MIL-C-13924F per JAN-C166J standard per Yoke, Wire leads UL standard per MCO-1620A. Withstands at least 500VAC per JESD22-B101 per 100 percent mechanical shock with proof test per ANSI/IEC60998-2-5 ESD air discharge per JESD22-A
There are many incandescent ballasts on the market, but fewer dual run ballasts. This is where you will find Dual Run Ballasts for your HID or Metal Halide lamps. Our Dual Run ballasts are built for outstanding performance and long life spans. We carry these Dual Run Ballast models in 120, 208, 240, 277 and 347V models with power ranging from 45-5000 watts.
The York run capacitor's purpose is to temporarily store energy and release it "on demand" to keep the motor running. It is essentially the same as the motor start capacitor, except that it does not have a circuit breaker or overload protection. Run capacitors should be used in conjunction with a line voltage overload and motor protection device.
Expandable up to 2 circuits of 210 amps each, this is the ideal circuit breaker for use at service entrances feeding multiple loads that carry moderate to heavy current.
York runs on its continuous horizontal, vertical and circular reciprocating motion heating and air conditioning compressors and one of the largest selections of gas and oil furnaces and air conditioners manufactured in North America. From gas furnaces, heat pumps to oil furnaces, central air to multi-stage cooling systems, York products offer the best in reliability, efficiency and value.