ICM CONTROLS SC075 SC075 2-WIRE Cool Only TEMPORARY THERMOST

2-WIRE Cool Only TEMPORARY THERMOST

2-WIRE Cool Only TEMPORARY THERMOSTAT. Use to control the temperature of air Handles up to 200 Watts of resistance.

The SC075 2-Wire, Cool Only, Thermostat is an industrial line, decorative wall thermostat used for single-stage cooling systems in residential and non-residential buildings. The SC075 can be used on all heat pump systems as well as conventional split or variable speed air conditioners and heat pumps. This model is compatible with most 24 VAC systems.

The ICM Controls SC075 is a 2-Wire Thermostat, Grounded Power Supply for Cool Only. With an OAT probe and a Max Temp of 45°C/113°F, the Control is designed for residential cooling systems (Secondary Side) only. ABS cover with brass bezel. Conforms to UL 94-VO flammability rating.

The ICM SC075 2-Wire temp. thermostat is designed for use on forced air gas, oil or electric heat systems and vented gas log systems. The thermostat opens and closes the pilot gas burner, allowing it to light only when the desired room temperature is reached. The correct size of the thermostat should be specified when ordering to ensure that there is enough room between the sensor probe and hot air convector or vented gas log system to allow adequate air circulation for combustion to occur.

The ICM Controls SC075 2-Wire Thermostat is a single stage cooling fan only. After the heating season or in areas where high temperatures are not common, the lower set point of the unit can be adjusted for a higher ambient temperature and the 2-wire thermostat will operate as a cooling thermos...

Amerimax ICM Controls SC075 SC075 is a 2- wire a/c temp control with built in high limit and low limit switches.

The ICM SC075 2-Wire TEMP alarm is the ideal solution for notifying security, maintenance or other personnel of a temperature problem. This versatile device is designed to notify of temperature drops to help prevent freeze-ups and reduce damage. The use of a 2-wire temp sensor allows the user to determine whether an area is cooling or heating, which may be important when conditions are critical. Possible areas of application include, but are not limited to, water chillers, HVAC systems, refrigeration or freezers, etc.