SCHNEIDER ELECTRIC 8910DPA43V04 -Square D 3p 40a 277v DP Contactor

3p 40a 277v DP Contactor

The AM-332 is an input potentiometer for the MP series DC power supplies

POTENTIOMETER FOR MP'S

A small potentiometer from the AM332 line

POTENTIOMETER AM332 is the auxiliary potentiometer with one adjustable resistive element, which is used to adjust the setpoint of the MP (Motion controller) in order to vary the reference voltage and thus enable to control a specific speed or torque

It is designed specifically to be directly connected to a SPST or SPDT relay (24V), and its input range extends from 0 to 10 V

Featuring a 2/8 cable, it can be mounted on the side or back of the air handler and is designed to replace or act as an additional potentiometer on a system

The unit has a NEMA 4X rating, so it can withstand submersion in water while still providing accurate readings

potentiometer for control panel mounting

The Schneider Electric AM-332 replacement potentiometer allows for quick and easy installation of a wide range of MP's

The signal is presented on terminals 1 and 2

Its shaft length is 13 mm and its diameter is 30 mm (1

The AM-332 is an analog input auxiliary potentiometer that can be used to control any application with an analog input

AUX

The Schneider Electric AM-332 is a precision potentiometer with a barber colman type case

This variable voltage reference has infinite rotation precision

The 3-way AM-332 is a single circuit, 4–20 mA analog input auxiliary potentiometer designed for use with the MP Series Multiposition Process Controllers

)

The control can be used with most MP model power supplies, and it can be used with both AC and DC inputs

This control allows users to adjust voltage and current manually, which is particularly useful for applications requiring a high degree of accuracy

The AM332 line is a range of microprocessor based electromechanical relay modules

These modules are designed to interface a control signal to various kinds of relays, contactors and sensors through analogue inputs

Potentiometer for MP’s controls the operation of a three-way or four-way split system

18 in

It has been used as aux

The control uses the potentiometer as an adjustable voltage divider in the control circuit and provides a "two terminal" output signal from zero to full scale corresponding to 0% to 100% of travel

The AUX

Maximum power, maximum versatility: the AM-332 auxiliary potentiometer for MP control panels

Ideal for residential mini-splits, the Schneider Electric® AM-332 (Barber Colman) Aux