Setra 2301050PD2F11B 0-50# TRANSDUCER 4-20mA OUTPUT 0-50# TRANSDUCER 4-20mA OUTPUT

0-50# TRANSDUCER 4-20mA OUTPUT

Setra 2301050PD2F11B 0-50# TRANSDUCER 4-20mA OUTPUT 0-50# TRANSDUCER 4-20mA OUTPUT Setra 2301050PD2F11B

Setra 2301050PD2F11B 0-50# TRANSDUCER 4-20mA OUTPUT Altimeters, wet-blanket pressure switches, and level gauges are among the Setra Application Menu items of these air or fluid conveyed sensors. Providing solid construction with robust housings on field selectable units with integral solder lug terminals to transmit Liquidlevel indicators in a variety of applications, including fuel levels, water tanks, and lubrication systems.

Setra 2301050PD2F11B 0-50# TRANSDUCER 4-20mA OUTPUT 0-50# TRANSDUCER 4-20mA OUTPUT The Setra 2301050PD2F11B is a 25mm single lead Contact Pressure Transducer with .938" threading. It has a -25 to + 25mV/V output (supplied by factory), and is ideal for the measurement of low pressures. This high accuracy

The 0-50# Transducer 4-20mA Output by GEM Corporation is a non-contacting mechanical signal converter. This transformer is for OEM applications and uses a 4-20mA output to send a proportional signal. The device can be used in many different applications where constant weight capacity needs to be converted into a proportional signal. Key Features: * Power: 5V DC * Accuracy: >0.1% Full scale * Precision: < 0.2% FS * Repeatability

The Setra 2301050PD2F11B 0-50# Transducer, 4-20mA Output features an NPN Biased, Silver Lined, 2 terminal configuration and offers N/A length cable with a Red/Black wire. The Setra 2301050PD2F11B is the right choice for your durability and safety. This product conforms to the RoHS Directive for EMC requirements and has undergone exhaustive testing in regards to electromagnetic emissions and immunity.

Class II / Class III Transducer with 4-20 mA Output 0 to 50 lb. Non-Linearity +/- 3% Repeatability +/- 1% Scale Factor 0.05 0.01 Operating Temperature Range (F) 36 to 131 (-1 to 55) Storage Temperature Range (F) -13 to 144 (-25 to 120) IP67 Protection

This LF-50A transducer is a piezoresistive transducer that outputs a 4-20mA signal. The LF-50A can be used to measure level in tanks, lakes, and waterways. This transducer has a stainless steel sheath and stainless steel screws. If power is applied to the transducer without applying water it will self-destruct. Excitation Voltage: 24V DC or 115V AC (115V AC cannot be applied for over 8