RHEEM 234674 Water Heater Blower - Centrifugal Max

Blower - Centrifugal Max

The RHW-018 is 120 VAC, single speed centrifugal blower. The RHW-039 has an adjustable thermostat and two-stage filtration. This unit mounts to the side of the water heater for direct discharge to the combustion chamber. It comes with a 3' power cord with a 5-25P plug, Leland water heater adapter kit and fan/thermostat wiring harness.

The Rheem 668-44500-6 is a centrifugal blower for Rheem and Ruud water heaters. It is designed to circulate air equalized in temperature through the water heater to remove condensation from the tank. The product is a replacement blower used in several Rheem models as well as Ruud brand water heaters.

The RHEEM® blower motor is a centrifugal, 3-speed, 2hp (1.5kW) 1 Phase motor that operates on 208/230 volts single phase. The internal rotor is permanently lubricated, temperature compensated and dynamically balanced. Enclosure is made of corrosion resistant materials; totally enclosed (TEFC) design reduces the need for maintenance and protects against dust accumulation.

A blower is an important part of any water heater. This blower has a strong and robust construction to enhance the performance of some of the most efficient water heaters that are available today. The unit is easy to control and match with other components.

The Rheem 234674 is a 15-1/2" Blower with 1380 CFM, 3/4 HP, and 60 Hz. It features a 239/67-Volt motor with Thermistor Control and an 18-7/8" diameter blade.

This Rheem 234674 blower is made to fit the Rheem water heater models on the list above. Never start off a season with a noisy blower again.

The Rheem 234674 Blower is used on Rheem's gas, LP and dual fuel (gas/LP) water heaters in order to remove condensation and combustion gasses.