Johnson Controls 9307 Temperature Sensor, Duct Mounting, Nickel, 1000 Ohm

TEMP SENSOR; 1000 OHM; NICKEL; FOR

Johnson Controls 9307 Temperature Sensor, Duct Mounting, Nickel, 1000 Ohm; For use with Johnson Controls control devices; For universal applications; RoHS Compliant; Electrical Rating: 100-120 VAC (Voltage); -40- +125F (-40 to +58C) (Operating

Johnson Controls 9307, Temp Sensor, Duct Mounting, Nickel, 1000 Ohm

This temperature sensor is a nickel-plated aluminum sensor that can be mounted to a duct wall or other exterior surface. The probe has a length of 1 ft. and the overall length of this sensor is 5 ft. This sensor uses a 1000 ohm thermistor.

Johnson Controls' 9307 Temperature Sensor is a 1000-ohm sensor which is used in line with an external controller to control the damper position of a packaged terminal air conditioner. It sits inside the plenum chamber of the device and sends signals to turn off or on the compressor or condenser fan at a programmed set point, resulting in proper system operation. For use with Johnson Controls PowerMaster Honeywell HVI-100 Day/Night Controller.

The Sensistor 9307 Temperature Sensor from Johnson Controls is a dual-rated, 1000-ohm air terminal sensor for use in HVAC systems where the highest levels of accuracy and precision are required to maintain precise control of air temperatures. This sensor, complete with a cord cover to protect wiring connections, comes with screws for easy mounting.

The Johnson Controls 9307 1000-Omega universal Temperature sensors are UL, CSA and CE listed. These duct mounting Temperature sensors can be direct or remote mounted in most applications with various probe lengths. Corrosion resistant nickel plating assures extended life in the most corrosive of environments. Sensors transmit data via NRD-series transmitter modules.

This temperature sensor is specially designed for use with electric forced hot air heating systems. It features a nickel-plated brass body, gold-plated leads, and a resistance range of 0 to 5kohm .

Johnson Controls 9307 Nickel Duct Mount Temperature Sensor. For indoor use only, Fits the following: ASCO: PS5679B-A10, PS6027R-A053, PS6027R-S1, PS7019D-A10, EATON: Venstar 402092, EST: MSI3019_5152_402529_402532_402376_402373_402349_402357_403293_699163, Johnson Controls: SPSC24148BM001016XX004150, RHEEM

This sensor generates a linear 4 to 20 mA output proportional to the temperature of its sensing element. The sensor has a 600 ohm input impedance and can be configured for either NTC or PTC sensing elements. When used with the IAQ Sensing and Display Kit (9390) and IAQ Sensor and Display Board (9391) the sensor produces a current proportional to the concentration of VOCs in the environment. The enclosure is plastic with a nickel finish.

Johnson Controls Temperature Sensors monitor temperatures within buildings or plant facilities.

This temperature sensor allows you to control your Johnson Controls air handler unit. Capable of handling temperatures of up to 135 degrees Fahrenheit, this temperature sensor is easy to mount and capable of providing the best temperature for your air handlers and mixers.

Overall Dimensions: Length: 19 mm ; Female Connector Terminals Diameter: 5 mils (0.127 mm); Cable Length: 1590 mm (62 in)