Honeywell 11460 Thermostat Pneumatic DA 1or 2-Pipe 60/90F Low Capacity Satin Chrome Cover

DIRECT ACTING PNEUMATIC THERMOSTAT

DESCRIPTION The Honeywell 11460 Direct Acting Pneumatic Thermostat is a direct/indirect acting pneumatic stat designed for use as a temperature control in heating or cooling systems. A bimetal de-icing switch provides the freeze protection. As the ambient air temperature around the sensing probe increases, the bimetal de-icing switch bends away from its anchor position, clearing the switch lever and opening the normally closed contact on the 5A electrical terminal that provides the power to heat the heater element of an HVAC unit or boiler.

This direct acting pneumatic thermostat features brass construction adapted to the HVAC industry. It is a snap action switch with temperature range of 5°F to 90°F and on-off switching capacity of 2 to 100 percent. Constructed with a satin chrome finish, it includes stainless steel hardware and an adjustable set screw for easy installation. This thermostat provides reliability and energy savings for your home comfort system.

The Honeywell 11463 is a direct acting pneumatic thermostat in low capacity. This thermostat features a timer and offers 1-way communication. This pneumatic thermostat is designed for air conditioning systems and can be installed in a vertical or horizontal position. The high-end satin chrome cover adds to its classic design.

The Honeywell Thermostat pneumatic DA 1or 2-pipe is a direct acting thermostat that can control two electric baseboard heaters independently. It features a temperature range from 60 to 90 degrees Fahrenheit, with a 16-degree differential adjustment for optional use and has manual reset switches on each position. This programmable thermostat comes in a satin chrome cover with a 1/2-inch MPT inlet and outlet connection.

The Honeywell FC9060 programmable Thermostat with 1/2" dial, 2-pipe is designed for systems that require a 24-volt signal to control a pneumatic double acting actuator. It features a low voltage terminal (LVA) designed for use with 24 volt actuators, and direct acting thermostats. This two pipe system has an output of 100% outlet shut off and 80% inlet shutoff. The TEMPERATURE LIMIT parameter is adjustable between 60 °F and 90 °F, while the.

The Honeywell NH-11460 Thermostat with Pneumatic Direct Action offers a compact design and a variety of mounting options. The stem is designed to compensate for manufacturing variations in temperature and humidity affecting steam pressure control valves up to 1-1/8" NPT. It is designed to control steam or hot water (90F) heating applications.

Honeywell Thermostat for your central heating system. First time setting up a central heating system? Then choose Honeywell. The Honeywell 11460 Pneumatic Thermostat, Satin Chrome is a pneumatic thermostat that replaces the standard of mechanical thermostats in central heating systems.