United Electric H400K-456 Co. H400K456 2/20# SPDT NEMA 4 Diff # Swtch

2/20# SPDT NEMA 4 Diff # Swtch

The United Electric H400K-456 Co. H400K456 2/20# SPDT NEMA 4 Diff # Swtch is an easy way to add new functionality to your existing setup. It comes with a large variety of applications, making it ideal for use in both simple and complex projects.

The United Electric H400K-456 Co. H400K456 2/20# SPDT NEMA 4 Diff # Swtch is a electrically operated 2 position SPDT switch that is rated for usage in indoor and outdoor applications, as well as commercial applications. It is rated for 2A Switching capacity @ 120VAC. The H400K-456 Co. H400K456 2/20# SPDT NEMA 4 Diff # Swtch has a normally open contact on 1 pole, and a normally closed contact on the opposite pole.

The United Electric H400K-456 Co. H400K456 2/20# SPDT NEMA 4 Diff # Switch was created to be used on a typical two wire dead end circuit. The switch can be used in 120 Volt AC or 240 Volt AC single phase applications, and it turns off and on with the flip of a switch. It is great for homes or small businesses, ideal for industrial or commercial use, as well as other areas where on and off switches are necessary.

The 400 K-456 2/20# SPDT NEMA 4 Compliant Knife Safety Switch has a knife blade rating of 5% to 100%. The normally closed terminal contact can be used as an emergency stop device or is capable of operating a load disconnect switch. The terminals are rated at 20,000 cycles and the switch includes a SC962T handle lever, HP923B Solenoid Actuator and one R44-GB pressure-tight connector. The handle is black.

United Switches™ brand H400K-456 Co. miniature pushbutton switches come in an easy to install design. These momentary, toggle, and pilot lamp switches are ideal for use in a wide variety of applications. Each switch is rated for 2 and 20 Amps at 120/240 Volts and has a 20 volt DC pilot lamp.

Two different circuits with independent control of an incandescent up to 20A, or a 120V relay. NEMA 4 [IP67] protection for use in outdoor/wet environments.

The H400K456 is a 4-position auxiliary switch designed for use with the United Electric H400K, H400L, and EV and Indoor Series Direct Drive Fans. Control of the fan is enabled through the use of single pole, double throw switches to select one of three speeds.