JOHNSON CONTROLS VA-7010-8002 VA-7010-8002 120V ACTUATOR ON/OFF

120V ACTUATOR ON/OFF

The 120V Actuator On/Off is mounted in a junction box and uses a cost-effective spindle actuator to control 240V loads. It can be used in a variety of applications, including access control, burglar alarms, fire dampers, and lighting controls. This product comes with a five-year limited warranty.

The Johnson Controls VA-7010-8002 VA-7010-8002 120V Actuator ON/OFF allows you to turn a load off from a remote location. It is designed for use with air conditioners, heaters, and central heating equipment, as well as many other appliances. Loads can be turned on or off from remote locations for security or energy conservation purposes.

The VA-7010 series 120 VAC 2 pole normally open (NO) and normally closed (NC) actuator is a two-in-one unit for mounting convenience. The first (front) position is used as a manual ON/OFF and the second (rear) position is used as a normally ON/OFF actuator.

The Johnson Controls VA-7010-8002 is a 120V actuator with an on/off switch. It has a short wire lead and easy wires through mounting holes for simple installation.

The VA-7010-8002 120V Actuator is available in single phase with thermoplastic housing in bar coded packaging in both in line and coil contact models.

Change the state of the circuit with this 120 VAC Valve Actuator. The valve actuator can be used to control two-position valves. This actuator is simple to install, features an integral fault indicator, and operates on 24 to 277 Volts AC or DC power. It has a maximum working pressure of 150 PSI. Specifications are subject to change without notice.

The VA-7010-8002 is a 120 VAC normally closed actuator that has an adjustable time delay. This self-contained actuator provides override capability for automatic or remote controlled equipment; suitable for use in wide variety of applications including power pool covers, barriers, sliding doors and other large area control devices.

Actuator has built-in overload protection to transfer the operation function directly without any damage. Actuator is suitable for all types of valves with necessary operating force, long service life, optimum energy-saving ratio, reliable & safe control. Actuator can stop or reverse the direction of valve immediately with power failure, make the valve operational within 0.05s after power failure.

The Johnson Controls VA-7010-8002 Actuator, 12 VDC (On/Off) comes with a mounting bracket and is made for Series 63 Pneumatic Controllers.

VA-7010-8002 provides the same classic "Java" hands free control, for remote activation and deactivation of exhaust fans. This ruggedly built control converts up to 3 wire NEMA 5-15 switched circuits to 120 VAC either open or closed loop control. It comes with a loop powered powered by corded plug adapter attached to power source. It can be used to set point temperature controller.

The VA-7010-8002 is a solid state, general purpose, single pole 120V AC relay. It will provide an OFF COM contact resistance of 0.75 Ohm minimum and an ON COM contact resistance of 4 Kohms or less at a current rating of 24 V DC or 24 V AC with a current rating of 2 Amps maximum both CW and CCW termination.

For Convenient Hands-Free Operation! A Built-In On/Off Switch Provides Smooth And Continuously Adjustable Motion For Your Filter's Pump, Motor Or Back-Up Battery. One Axis Of Actuation Range From 15 To 30 Feet.