Honeywell 169769 Three-way Fan Coil Valve, 3/4 in. NPT, 5.0 Cv

Three-way Fan Coil Valve, 3/4 in. NPT, 5.0 Cv

For split system air-conditioners and heat pumps that are connected with copper lines to a cooling tower or boiler, this 3/4 in. NPT three-way fan coil valve features 5.0 Cv. The ven
 trated discharge side minimizes water hammer and rebound, while the balanced flow design directs the steam to prevent short cycling. A manual drain available on the bottom of the body provides an easy way to remove condensation, and the standard size stem is made from durable brass for a longer service life.

The 169769 Honeywell Fan Coil Valve provides a heating straight or simultaneous (w/o primary heat) and fan coil output. This performance 3/4 in. NPT fan coil valve features a 5.0 cv motorized damper with Power Boost, gas heat, and three-way operation, plus four changeover options and is designed for use with room air-conditioners, baseboard heaters, and dual fuel heat pumps that operate with hot water or steam jackets at operating pressures up to 200 psi (1.38 barg) at temperatures up to -4°F (-20°C

The Three-way Fan Coil Valve by Honeywell controls the flow of chilled water to the cooling coil. It is used in air conditioning systems that require a 3-way valve. Damage from a power failure lockout feature prevents this valve from turning on when there is a loss of power to it, or if a limit switch gets activated.

Honeywell's Uptown Arrangement of the innovative Air Coil Three-way Fan Coil Valve allows for electric heating, chilled water pumping and both outlet air volume flexibility. This valve is designed to work with 5 ton outdoor condenser units. The body is constructed with brass, and the parts are made from rust resistant materials for maximum durability. It is a great option for residential heating systems where flexible installation options are desired.

The three-way Fan Coil Valve is designed for air conditioning or heating service. This type of valve controls fan coil units (FCUs) by modulating hot, warm, and/or cold air output."

This three-way mechanical fan coil control valve helps to achieve energy savings, for HVAC systems and applications using chilled water. The high-flow gas or electric actuator can be used with the DN15 (1/2 in.) and DN20 (3/4 in.) body. The three-way valve features a bronze body with a stainless steel bonnet and trim ring, and an all metal lever in a sealed nitrogen chamber.

Honeywell's 169769 Fan Coil Valve provides temperature control for residential and light commercial applications, and comes with 4" of plenum length to adjust airflow and direction. The 3/4" NPT fitting is designed to work with copper tubing for a secure connection found throughout ductwork.