York 025-40273-001 LEAVING TEMP SENSOR

LEAVING TEMP SENSOR

York's LEAVING TEMP SENSOR can be used to help determine if the air conditioner is operating correctly. This 60-minute automatic reset sensor records the dewpoint (leaving temperature) reading, which is referenced against the compressor's running time. An integral timer on the sensor provides a critical readout on problem conditions, indicating incomplete defrosting, for example.

With the YCHN-40273-001 Leaving Temp Sensor, you can monitor the temperature in your pool or spa. It has a 5ft cable and works with all YORK Hayward pool products that are compatible with the PRO Remote Monitor - ARC5. The sensor requires 15 seconds to take a temperature reading after attaching it to the tile wall of the pool area, and readouts are taken every 5 minutes.

The York 025-40273-001 water heater console is designed for installations using the baseboard, air duct or electric resistance heat. This console offers enhanced performance in your hot water system with an adjustable leaving temperature sensor. The easy to use knob allows you to raise or lower the leaving temperature in increments to accommodate your personal preference. This unit also offers a reserve differential of 5°F and a 5 year warranty .

Designed for use with YorkOnDemand Home Energy Management Systems; programmable, non-volatile memory; provides continuous notifying of leaving temperature; dry contact closure rated at 10A direct at 30VDC; can be used in place of room thermostat (compatibility and wiring instructions available); and operates off 24VDC or 120/240VAC, 50 or 60Hz.

The new York Four-stage Temp Sensing Variable Speed Indoor Fan Can be controlled for heating and air conditioning using the installer-friendly four-wire connection. The new variable speed model maintains an airflow level of 40.4 cfm (net) at 0°F ambient to 130°F ambient, providing efficient venting in both heating and cooling operating modes.

This innovative easy-to-use sensor senses the temperature of the refrigerant as it leaves the evaporator and adjusts the compressor as necessary to maintain as close to a set point as possible. This means that you will have constant comfort for your system whether it is heating or cooling. The sensor does not affect your energy efficiency because it lowers the compressor's on/off time, not its runtime.

This Lyric T5-40MRB15W is a 1800 Watt 240 volt A/C only, base mounted fan Forced heater. It requires a 208/230 Volt electrical connection and has a 14 wire leads on a 30" pig tail. This unit is self-protecting, has a manual reset and can be field converted to TH3 with the addition of the 02CRN/TH3 kit thermostat.