York S1-024-35263-000 "-1.45""WC SPST PRESSURE SWITCH" "-1.45""WC SPST PRESSURE

"-1.45""WC SPST PRESSURE SWITCH"

The York S1-024-35263-000 "-1.45""WC SPST PRESSURE SWITCH" is a replacement pressure switch it is designed to fit your residential or commercial hot tub and spa equipment. This unit features a NEMA 1 enclosure and aluminum heat sink bonded with epoxy coating to help prevent corrosion.

1.45""WC SPST PRESSURE

This replacement pressure switch is used to operate 1.45""WC flow control valves, which are typically used for irrigation applications. The unit is preset to 30 psig, but can be adjusted by rotating nut below handle to desired setting. This 1/2"" NPT version has a full port to connect the power source, and a male adapter for connecting to your female threaded valve. Specifications:

The York 1.45" WC Pressure Switch with a 316SS Fitting measures 1.45 inches in diameter, and has a temperature rating of 250 degrees Fahrenheit. The switch is used to monitor the pressure of a water system, and when the pressure drops to an unsafe level, it will automatically open to prevent damage from occurring.

The YORK S1-024 Pressure switch is a manually operated, normally closed, spst pressure switch with a 1/2 NPTM threaded inlet and threaded body. The switch features a metal cover and a metal backing plate. Additionally, the switch has a nylon knob and piston rod to ensure lasting performance.

The YORK 1.5"" to 2"" series pressure switches are used for switching a load on and off in response to pressure or vacuum in process lines. The switches can be used to limit pressure, as a pressure switch or as an on load controller.

Pressure switches control the flow of gas to burners in gas fireplaces, ovens, stoves, boilers, furnaces and water heaters. The York SPST Pressure Switch features a plastic body construction with brass connectors.