York S1-024-25808-702 "-0.60""WC SPST PRESSURE SWITCH" "-0.60""WC SPST PRESSURE

"-0.60""WC SPST PRESSURE SWITCH"

The "-0.60""WC SPST PRESSURE SWITCH" is ideal for controlling and diverting the water flow in a variety of valves and applications, such as sprinkler systems and greenhouse irrigation, where a simple pressure switch is required.

Switch / Pressure Gauge - 0.60"" WC - Oil Immersion

Pressure switches are used on a variety of sanitary process equipment, as well as on numerous other types of equipment. In addition to use as a pressure switch, this product can be used as a pilot valve. This spring loaded Pressure Switch is used for all types of pressure control applications and is ideal for controlling water heaters, laundry equipment, ice makers, cooling towers and a variety of large or small fluid handling systems. PRESSURE SWITCH SPST ON-OFF CONTROL The switch is designed with copper leads that are connected together under the cap. The leads extend through the side terminals providing flexibility in piping connections. To close

A SPDT Pressure switch is used for switching of supply from a common pressure source, a pump or a flow controller, etc., based on a set pressure differential. This device is ideal for systems that require a controller to maintain a setting without being affected by fluctuations in process conditions. It has a long-life contact system with two gold-plated contacts and silver-plated copper alloy (CRES) terminations provides excellent electrical conductivity.

A pressure switch with a 40 psig (min) pressure differential; 1"""" NPT process connection; SPDT control function; and stainless steel body and actuator

The York S1-024-25808-702 Pressure Switch is used on the following models: Tork 10"W x 10"D Foot Activated Air Cannon, E2RMHN1RBHN1014142PW-110V, Tork 10"W x 10"D Mini Air Cannon, E2RMHN1RBHN1014232EH-110V, Tork 14.5"W x 22"D Dual Outlet Econo Series Foot Activated Air Cannon, E2RMHN1RBHNB1045092PW-58.5

This button triggers the PLC to start a motor, pump, or other actuator when a certain amount of pressure is reached. This Pressure switch is designed for continuous duty and has a 1/4" MPT inlet. The Pressure switch is made of thermoset material and is suitable for use with liquids or gases.