York S1-024-25006-708 "1.20""WC SPST PRESSURE SWITCH" "1.20""WC SPST PRESSURE SWITCH"

"1.20""WC SPST PRESSURE SWITCH"

This "1.20""WC SPST PRESSURE SWITCH" is designed for applications where it needs to be easy to adjust the pressure and temperature and keep it at a constant level without loss of liquid and vapor.

York "1.20""WC SPST PRESSURE SWITCH" (S1-024-25006-708)

The S1-024-25006-708 is a 1.20""WC SPST pressure switch designed for use in water treatment systems. It has a minimum pressure rating of 25.55 psi, maximum rated pressure of 100 psi, minimum operating temperature of 32 degrees Fahrenheit, maximum operating temperature of 180 degrees Fahrenheit, contact rating of 6 amps at 125 voltsAC, contact rating of 6 amps at 250 voltsAC, minumum current rating of 5 milliamps DC @ 20 milliamps DC, item acrating status is in stock & ready to ship today.

The 1.20"" WC pressure switch provides automatic on/off capability to electric water heaters or other electrically controlled heaters, which are used to heat small quantities of hot water (up to 4 gal.). The temperature range is 140 F at the full-on temperature to 125 F at the full-off temperature. Ideal for tub/shower/sink systems, this universal pressure switch fits most 1.20"" wc configurations.

The York 1.20 WH SPST Pressure Switch is used on Rheem water heaters, geysers, boilers, air conditioners and gas fires. The switch is made of brass aircraft material making it corrosion resistant.

Pressure-activated, normally closed SPST switch rated at 130 PSI at 70 °F. Switch contains two ports: one 1/4" NPT female reducing port and one 1/2" NPT female inlet port.

A pressure switch is an electronic control device used to control the water, air, oil, or steam flows in a predetermined manner. It is mainly used in domestic and commercial places. When the pre-set level or position of the sensing element is reached or exceeded, the pressure switch connected to that element begins to perform logic operations.