York S1-031-01954-000 Defrost Time/Temp control Defrost Time/Temp control

Defrost Time/Temp control

With the York S1-031-01954-000 Defrost Time/Temp control, you will be able to set the defrost time and the temperature for defrosting. The temperature setting can range from -40°F to +140°F while the defrost time can range from 0 sec to 99 min. This board is equipped with a built-in evaporator fan, a fuse protection and an alarm.

The York S1-031-01954-000 Defrost Time/Temp control is packaged with 1 channel, 3.6 amp solid state defrost timer. The unit has 24VAC, 60Hz input power and the operating temperature is 32 to 122F. It has one channel with three set point or defrost cycle times (20, 40, and 80 minutes). There are two 0-15 second repeat cycle outputs.

The YS Series freezer with Defrost Time/Temp Control (DTC) is an all-refrigerator for the foodservice industry. It is capable of maintaining temperatures between -20 and -26°F and can be easily customized to meet the most demanding customer requirements. The DTC offers the following advantages:

The S1-031-01954-000 Defrost time/temp control is designed for use with unvented room air conditioning units. This defrost control is models C15T1,C20T2,C20T3,R22T2,R410A. The defrost time/temp control has a 1/8 inch quick connect inlet and 3/4" supply line connections.

The York S1-031 Time/Temp control defrost chest freezer is perfect for any food service operation. The compressor comes with electronic time/temperature controls, which make it easier to program and can help reduce operating cost. This top freezer features stainless steel shelves, tubular heaters, and low voltage light kit.

An electronic defrost timer that advances the time and temperature for defrosting and automatic recovery. Advantages: Set times and temperatures for both defrost and recovery, Low temperature recovery (for slow-to-thaw foods), Auto recovery (cycles on and off until ice is gone).

Conveniently located for use in laboratories or educational settings, the ARC-40 is equipped with auto/manual defrost to enable the user to decide when to defrost the unit. This feature is particularly useful for fast freezing of samples. With an optional time preset by the user, the MR-10C controller can be pre-programmed to defrost at a specific time or temperature. The power switch allows the user to activate the automated freeze function, further reducing their workload.