York S1-8680-5391 Clamp Motor Mount

Clamp Motor Mount

Clamp Motor Mount is made of steel, provides adequate power for most small tools, and is ideal for rigid or flexible shafts

The York S1-8680-5391 Clamp Motor Mount with 1,200 lbs. lifting capacity and 36" reach is perfect for use with model

The York Baker clamp motor mount is perfect for mounting an Axis Clamp Motor to an adjustable chain link fence or chain link gate. Made from heavy duty steel, this bracket fits easily over the chain links without having to remove any links.

Voltage: 220-240 VAC Phase: 1 Output Amps: 5.7 Stall Current: 18.9 A Air Flow Rating @ 0 PSI: 2300 CFM RPM Range: 1750 ~ 1150 RPM Frame Size: 85 Frame Type: J Frame Mounting Type: Clamp Motor Mount Enclosure Type: TEFC Insulation Class/Rating: B Ambient Temperature Group: Indoor

Use this clamp to install a motor on a tubing.

This motor mount is designed to attach to the top of any York Traditional Series Air Conditioner. The clamps are padded at each end for noise containment. This mount has three slots on the shaft, allowing adjustment of the units position up/down and side to side.

Designed for mounting a 1/2 horsepower single-phase AC induction motor with an 18-inch shaft to a woodworking bench, this clamp base is made of cast iron. It has a maximum weight capacity of 60 pounds and comes with an Allen wrench, two M8 x 10 mm screws, two M8 x 16 mm screws, two M8 axle washers, two M8 hexagonal nuts, and an operating manual.