IGNITION TRANSFORMER FOR WAYNE E
This Ignition Transformer for Wayne E has a MCB output. It is compatible with the following brands and models: JERR-Dan/Wayne E CB65S Stihl/Wayne E ALLEN-Bradley/Wayne E Allen Bradley 122371, xxxxx BELIMO/Wayne Clark Semiconductor
The Allen-Bradley 2721-620 is an ignition transformer for use with High Voltage Transformers, Design Group HD & H. This transformer is capable of bringing 120/10000 Volts AC to all 7 pins in the WAYNE-E style under normal operating conditions.
This transformer is used on the following Wayne E burners: *14*(-11), *14A*(-11), *15*(-11), *20*, and *21*. This transformer has a maximum re-coil rating of 100 amps.
**Wayne E** is a leading provider of quality Transformer turns and new starter systems. Our commitment to quality control is reflected by our ISO-9002 certification, Wayne E's ISO 9002 certification indicates that we meet and exceed an international standard for quality management. The certificate is awarded only after an independent, 300-plus point audit of our organization's system for conforming to customer and industry standards.
4-wire to 2-wire Conversion Kit igniter transformer converts plugs with 4-wire spade terminals into 2-wire spade or twist type connectors.
This transformer has the following configuration: Primary 250/120V, 60 Hz, 2--1/0 AWG's; Secondary: 120V, 1.0 AMP, 6000 VA, 2--10 AWG's An excellent primary or secondary for welding machines. It has a robust solid state circuit interrupter rated @ 100KA @ 240VCA, and 3000 vdc only (zero amp-trip). The 120 volt taps are on the front of the casing. This transformer is supplied
Measures 120,000 Volts, 10,000 Watts; AC/DC Primary: 240 VAC / 115 VAC / DC; 24 VAC / 13.6 VAC / 1.8 VAC; 510 kHz; 0.125 HZ (50 Cycles); AICI Insulation Class F; complete with Power Disconnect Switch, Circuit Breaker and Secondary Shunt trip for over current protection ????????? ?????? -