WHITE-RODGERS 100006 White-Rodgers Board Mount Limit Control 1/2" Bimetal Disc, Opens At 175°F, Closes At 145°F

BOARD MOUNT LIMIT CONTROL OPENS AT

WHITE-RODGERS 100006 White-Rodgers Board Mount Limit Control 1/2" Bimetal Disc, Opens At 175°F, Closes At 145°F. This white rodgers limit control is part of our bimetal disc line and has a 1/2 inch bore size. It features a 240v 120v 3 phase power rating and is approved for installation into an indoor environment. It was designed with copper alloy contact elements sealed in a glass bulb to provide long life and reliable performance for your heating or cooling system.

The White-Rodgers 100006 Limit Control (1/2" Bimetal Disc, Opens At 175°F, Closes At 145°F) is a board mounted limit control for gas or electric furnaces. This limit control opens when the temperature to the furnace reaches 175 degrees Fahrenheit and closes at 145 degrees Fahrenheit. It can be used as a boiler limit control and also has an adjustable differential feature. It can be used on supply ducts with one or more heaters connected to the same ducting.

Monitor and control temperature with White-Rodgers bimetal board-mount limit controls. These low-cost, simple controls are used in a wide variety of applications to protect systems from excessive temperatures, such as furnaces, boilers and heating coils. The controls can be mounted on or in the equipment or inside the control panel.

This White-Rodgers board mount limit control is a 1/2" bimetal disc, opens at 175°F, and closes at 145°F. This item measures 2" tall and has an 18/8 stainless steel construction.

The White-Rodgers 1/2" Board Mount Limit Control 100006 is a bimetal disc heat control that opens at 175°F and closes at 145°F. This limit control is for use in residential hydronic systems and can be surface or flush mounted.

White-Rodgers 100006 White-Rodgers Board Mount Limit Control 1/2" Bimetal Disc, Opens At 175°F, Closes At 145°F. White Rodgers 1/2" Board Mount Limit Controls have a die cast aluminum housing with zinc die cast bonnet and seat. Contacts are silver cadmium plated for the longest life.

The White-Rodgers 1/2 in. Board Mount Limit Control, 100006 is a bimetal thermostat that can be used with baseboard or convector heaters. It is a solid state control with an adjustable differential. It offers an operating temperature range of 40 to 150°F and opens at 175°F and closes at 145°F. This limit control is designed for indoor use only and comes with a one year warranty for parts and labor from the date of purchase.

1/2" Bimetal Disc, Opens At 175°F, Closes At 145°F. The Limit Control opens the contacts at the preset temperature and closes them when the set point is reached. The Limit Control works on either heating or cooling systems to protect equipment from freezing or overheating. Easy to install, with no wiring required.

The White-Rodgers 100006 White-Rodgers Board Mount Limit Control (Bimetal Disc, Opens At 175°F, Closes At 145°F) is used to prevent damage to heating and cooling systems caused by overloading the system. This is done by opening and closing the limit control when temperature rises and falls above or below a set point.

WHITE-RODGERS 100006 WHITE-RODGERS BOARD MOUNT LIMIT CONTROL 1/2" BIMETAL DISC, OPENS AT 175°F, CLOSES AT 145°F White Rodgers™ Limit Controls are special devices that protect equipment and building heating, ventilation, and air conditioning (HVAC) components from excessive temperatures. These limit controls sense the temperature in a duct or air stream. When the temperature reaches a pre-set level the limit control activates an alarm and/or shuts off the equipment to prevent overheating.