12VDC SINGLE POLE NORMALLY OPEN CON
The WH-RODGERS 101877 white rodgers 12VDC Single Pole Normally Open Contact is a single pole normally open contact used to control lighting and other low voltage 12 volt appliances. The pack consists of one WH-RODGERS 101877 normally open contact with an attached 24" wire lead for easy wiring. This product is covered under white rodgers 1 year warranty and made in the USA for home comfort.
The C-101877 12VDC Normally Open Contact is included in the 119000 Series pushbutton door and window contacts along with the rest of the line of White-Rodgers products. This single pole normally open contact is a white painted steel design that is compatible with a wide variety of different applications, including those in heavy residential areas. This particular contact also carries an L suffix which means it is approved for outdoor installations and has no enclosure requirements in order to work properly. That means you can install this device directly into a small hole in your wall and it will still function just fine, even in extreme weather conditions
Supply air conditioning to your system with the White-Rodgers 101877 single pole normally open contactor. This 24 VAC device will fit a variety of standard openings while offering an amperage rating of 0.5 amp. It is designed with an adjustable mounting bracket for easy installation whenever you need it.
The P260-1230 is a single pole normally open contact designed to send an alarm signal to the control panel when a circuit is opened or broken. It is used with a normally closed contact in a 2 wire alarm system.
Single pole devices (SPD's) have one C terminal, one common, and one Normally Open (NO). It will open when the voltage is greater than the trip point. It will close when the voltage is less than the trip point.
The W-101877 1/2" normally open single pole motion sensor features field adjustability and a black steel housing with stainless steel screws. It is rated for use in residential and commercial applications.
The WHITELINE 1787NP series of contactors are simple, rugged and economical. They hold up well at high temperatures. This makes them an excellent selection for most welding applications.