Honeywell 2066 Minipeeper Ultraviolet Flame Detector, 8 feet leads

MINI-PEEPER UV SENSOR -40/250F COND

The MINI-PEEPERâ„¢ UV SENSOR monitors and detects invisible ultraviolet radiation emitted by all types of gas, propane, acetylene and gasoline leaks. The UV sensor is available in a variety of lengths. This model includes a 8' cord with receptor plug and antenna. Permanently installed sensors have detectable ranges up to 150 feet for propane and gasoline, while portable units provide up to 40 feet of detection. They also use radio-frequency generators to automatically sound

The Minipeeper UV Sensor is designed to be mounted on top of a stove, outlet, water heater, furnace, water heater, fireplace liner or woodstove. The MINIPEAKER UV SENSOR comes with a 8' cable and has a 10 foot power cord. The Minipeeper UV Sensor turns off the equipment if it detects even one flame.

Minipeeper UV Flame Detector is a rapid response, flame-producing sensor designed to monitor fires in natural gas and other non-flammable gases. It is suitable for indoor and outdoor applications. It produces a 2" flame when exposed to flame producing gases, including propane and natural gas.

The Minipeeper F 5 UV flame detector is a combination detector and indicator for flames where visual inspection is not practical or possible. The 2.5m (8.2 ft.) sensor cable extends from the controller box, allowing the detector to be placed outside and away from potential obstructions. The UV flame sensor can detect hydrogen gas (H2), Methane gas (CH4), Oxygen gas (O2), Carbon Monoxide (CO), and LPG/propane and natural gas

The Minipeeper UV flame detector is a low cost, high performance, fixed-wing UV flame detector designed for hard-to-monitor gas and liquid fuel applications. The detector is ideal for HVAC, outdoor grills, furnaces and boilers. For combustion applications at low to mid flow rates the UV flame detector delivers more than 5 times the performance of competitive units and in some cases up to 20 times the performance.

Monitor fire and UV levels with this easy to use MinPieper UV detector. With the built-in audible alarm, there are no pop-ups to read or toasters to see if your UV candle is working.

The Mini-Peeper line is made of UV fluorescent plastic, used alone, or in conjunction with other flame detectors such as photo electric devices to form a self-monitoring system for keeping the vigilance required for water and steam applications such as boilers, chillers, and process control systems. Some Micro-Peepeers are also used as a flame arranger that can be used in conjunction with an FM-200 foam fire suppressant system. http://www.honeywell.com