Field Controls 46282641 CK-41F Control Kit Designed For SWG, DI Series 24V Gas Systems

"CK-41F

The CK-41F Field Controls Control Kit is designed to fit the Field Controls 4" DI and 2" Sink Top Electronic Ignitor. Fits "SWG" by "WEBER " or other brand gas inlets with a thread size of 1/4"-28 and a spline count of 21. 1(6) ft gas supply line included. Features: Complete kit for one burner on model #'s DCS 200, 260 & 270, Control knob adjusts flame size for

The CK-41F is a control kit designed for use with SWGAF series injection pumps. It includes: 1 DI-200S controller communicator, and 1 DI-41F injection pump controller.

Field Controls' CK-41F control kit is a two-stage control for DI Series 24V gas systems.

This control kit replaces the field-supplied thermostat and manual reset device on your CK-41F or CK-41S system.

This CK-41F control kit is designed for use with SWG, DI Series 24V gas systems. The kit includes a main control valve and a gage panel that mounts with two screws to the back of the control valve. It also includes an electric ignition module, 12" long wire harness, and hanger brackets.

Designed for use with Cen-Tec 1/2-Inch Male NPT Gas Valve. The CK-41F Control Kit is constructed of metal and includes a drain valve, manual control, exhaust damper, gauge (indicated in inches or mm of water column), vacuum breaker, stop valve, and bayonet plug.

This kit is for SWG, DI Series 24V gas systems * Designed to conserve energy by reducing energy waste from a hot water source which may be less than 200°F * Recommended for hot water tank set temperature of 140°F-125°F * Reduces amp draw by up to 50% while maintaining full output power; **40.8 amps** with standard control; **26.7 amps** with CK-41F control kit * For use on all Di & SWG series