Honeywell M9484E1009 , Inc. Modutrol IV Motor, 75 lb-in, 1 Switch

"24v 15sec90'

The Honeywell Model M9484E1009 24v 15sec90' motor is ideal for residential garage door applications. It is belt driven, providing quiet operation. The temperature rating of 50 to 100 F makes it suitable for a variety of locations.

The M9484E1009, INC. Modutrol IV Motor-Fan is rated 75 lb-in and features a 1 SPST switch with 90 second time delay. It has a voltage of 24v and 15 sec. timing sequence. This particular motor-fan comes with a UL certified Wiring Harness. The key features are:

The Modutrol IV Motor is a 15 second (90" @ 115VAC) Series-4 horsepower fan motor with integrated CT. It controls a minimum air volume that helps achieve energy savings. It also features an Intrinsically Safe design, and has been Underwriters Laboratories (UL) listed for Type 4X/Zone 2 and Class II Divisions 2 and 3.

The M9484E1009 is a 1/2HP, 24VAC or DC microprocessor-based control motor for furnace. It is used as a primary or secondary motor for furnace blowers and fans. The M9484E1009 has two operating speeds, 1000 and 1300 RPM's. This power motor is designed for use with all three types of gas furnace motors and can be used with any other electric furnace model where a size (length) match exists (35mm x 56mm shaft required).

The Honeywell Modutrol IV variable torque motor lets you control both speed and direction of the motor in single-phase applications with a 3-wire Delta (wye) connection. The offset construction lets you mount the motor other than flush, and the direct drive configuration lets you operate 220v and 440v motors at 115 Vac. The unit requires 90' lead wires, is non-reversible, and has an adjustable total derating factor from 0.75 to 1.20 for optimum performance operation under partial load conditions.-Button, selector type with fixed neutral point (switch not included).

Inc. Modutrol IV Motor, 75 lb-in, 1 Switch

The M9484E1009 Modutrol IV motor is a step (nEMA) motor that is used for simple positioning in applications such as clean room automation, X-Y tables, package handling, machine tools and medical device.