Honeywell Q179A1035 , Inc. Flame Rectifier Gas Pilot 0025in orifice diameter 45 degree R/H burner tip

GAS PILOT ASSM.W/IGN.ELECTRODE

The Honeywell gas pilot assembly (part number: Q179A1035) is a speciality gas pilot that delivers flame only. It is used on right hand burners of the Majestic and other ranges listed below. Use with orifice size: 0025-in., tip angle: 45° R/H, and burner opening diameter: 25 mm. The standard igniter electrode's resistance end-to-end must be 1¾" to 2?" apart for proper ignition.

This pilot assembly, consisting of ignition electrode and gas valve. This pilot assembly can be installed on a wall thermostat assembly or programmable thermostat that will turn the entire unit on and off automatically as needed.

The Honeywell gas pilot assembly is a pilot assembly that is ideal for use with gas heaters, ovens, and cook tops. This pilot assembly features 3/8in-27 NPT inlets & outlets, an orifice diameter of 0025in, and a 45 degree R/H burner tip. This assembly comes with a flame rectifier valve that checks for proper gas flow and turns the pilot on when gas is detected.

Honeywell is a true OEM manufacturer of gas pilot assemblies. HONEYWELL GAS PILOT ASSEMBLIES deliver the performance you need for safer and more efficient operation.

The honeywell inc. pgcp-100 pilot assembly has a flame rectifier type gas pilot which measures 1-1/8 inch x 1/8 inch in diameter with 00-25 orifice diameter, and 45 degree R/H burner tip. The pilot assembly spare part number q179a1035 is for convenience appliances and packaged terminal air conditioners models: ap60c15z4v3d, ap65k25z2v4d, ap65k25z4v4d, bg60h12lfp4a, con83k15mv2p4bg

The Honeywell Q179-A1035 flame rectifier is a pilot assembly used in natural gas or propane systems for residential and commercial purposes. The pilot flame rectifier converts energy from the igniter electrode into heat, which ignites the gas for the main burner.

The Honeywell Q179A 1035 , Inc. Flame Rectifier Gas Pilot 0025in orifice diameter 45 degree R/H burner tip is a gas pilot assembly who's duty is to ignite the burners of the appliance it's installed in. This particular unit is designed with an orifice diameter of 0.0025in and a 45 degree Right Hand (R/H) burner tip. The overall length if the unit itself that will fit into your household's gas range burner can be up to 4.5inches. The orifice measures in at 0.12in diameter and the connecting end, where you