Honeywell V4044A1001 Line Voltage Zone Valve Replacement Head - /U v4043-9

120V 1/2" FLARE ZONE VALVE 2-POS DIVERTING W/LEADS

The V4044A1001 2-position zone valve (Diverting W/Leads) from the Honeywell V4044 Series is a 120V line voltage valve for better home comfort. The V4044 series valves are Dual Range, Zone Control Valves for use as main drain line valves, supply line valves, zone control valves and humidifier/dehumidifier expansion valves for heat pump systems. The V4044 is designed to work with up to two normally closed auxiliary switches placed either at the valve or in the system piping.

The Honeywell 1/2" Furnace Line Zone Valve Replacement Head V4044A1001 offers a 2 position diverting valve. The Honeywell zone valve is used on heat pumps and other heating systems to allow air to either flow through the blower, or through a heat exchanger. This replacement head with leads includes the wiring connectors for quick installation and is used with the following heat pump models: Comfort G, GMBH42ANB, GMBH42ANI, & GMBH42ANL. Please check your model prior to purchase, as some models use different part numbers.

The V4044A1001 is used with a wide variety of existing Honeywell 3/4" & 1" zone valves to configure a four-way diverting valve. It can be used in conjunction with V4044A1000 ONE-WAY DIVERTING VALVE to create two-way flow patterns.

V4044A1001 - Zone Valve Replacement Head ... Honeywell line voltage zone valve replacement head installs in the transmitter. Includes two ports each of which provide 1/2-inch flare connection for valve ball.

The Honeywell V4044A1001 line voltage zone valve replacement head is a 2-position divert valve that diverts water from the supply source under zone pressure conditions. It has two chambers and includes two plug in terminals.

The V4044A1001 ZONE valve is a replacement AV4044/U zone valve with a flow control Diverter (black handle) and two leads. The flow control diverter enables you to divert water to either the shower or tub faucet using the tub/shower selector switch. This Zone Valve System uses the same diverter that is included with both of Honeywell's two-lever combo valve systems. It is intended to be used with the 4145U1 Valve Body, but can also be used with the 4144U1 when used with a SU5943P Stem Kit

This Zone Valve allows you to divert the flow of hot or cold water to one of two water outlets. It is used to provide hot or cold water to an area that does not have a supply main, such as a garage and is suitable for open loop applications where there is possible back-flow contamination or when no hot and cold water mains are available. The valve assembly includes head, mounting plate, setting collar, stem washer, keeper nut, body gasket and packing.