Johnson Controls CSD-SA1E1-1 Current Sensing Relay, 1 to 135A, 240VAC

24V SolidCoreAdj SPST NO Relay

Current sensing relays are used where current passing through the load can be measured. These relays have a solid-state output, and provide an accurate indication of current flow without using magnetic components. The CSD-SA1E1-1 is a 240VAC SolidCoreAdj SPST NO relay with NEMA 1 rated coil and contact sets, rated for 1 to 135 amp continuous loads on a single phase AC system.

This CSD-SA1E1-1 relay is intended for use in overcurrent protection applications where a controllable voltage or current signal is required. This SolidCoreAdj class of SPDT relays, with adjustable output voltage or current, include solid state electronic switching based on thyristor technology in a TO can package.

Johnson Controls CSD-SA1E1-1 Current Sensing Relay, 1 to 135A, 240VAC with SPST NO  relay operation. Protect your LED lighting investment with the CSD-SA1E1 Series Solid Core Relays. This line of Solid State Relays provide primary control for HID and LED lighting systems in a wide range of applications including outdoor lighting, floodlighting, high bay lighting and more. These 120 Vac relays feature an adjustable current adjustable range from 1 to 135 amps in five simple components. Protect your valuable assets by using the CSD-SA1E

Johnson Controls SolidCore® Adj relay saves energy by switching energy consuming loads on and off to avoid overloading circuit breakers or fuses. The SolidCore® Adj relay has no mechanical contacts and is only activated by a sudden change in current flow.

The CSD-SA1E1-1 is a 24V solidstate SPST C/O relay with current sensing and two status outputs. It is designed to control inductive loads up to 135A at 240VAC. This relay can be used in heating, HVAC, and other applications where load current needs to be monitored.

The CSD-SA1E1-1 current sensing relay, 1 to 135A, 240VAC is a solid state 24 VDC solid state adjustable NO (normally open) relay that is designed to control the startup of highly inductive or capacitive loads. This particular overcurrent relay has a built-in current sensor and embedded diagnostic feature. The CSD-SA1E1-1 current sensing relay, 1 to 135A, 240VAC is UL and CSA certified for use in Canada.

The CSD-SA1E1-1 is a solid state AC relay for a variety of applications. This SPDT relay provides 1 NO + 1 NC contacts, and will handle up to a maximum of 135A at 240Vac line-voltage. The relay operates on 24Vdc power supply and has an operational temperature range of -40 to 85C.