HONEYWELL ML6161B203 24V DIRECT-COUPLED NON-SPRING RETUR

24V DIRECT-COUPLED NON-SPRING RETUR

The Honeywell ML6161B203 24V DIRECT-COUPLED NON-SPRING RETUR ntrol is a single-stage non-spring return inlet pressure regulator. This product has been designed with a primary pressure setting and a secondary relief setting. The primary pressure setting can be used to maintain a specified system pressure based on the adjustable keg spring. Secondary relief may be adjusted from the factory with the trim-pot located on the bottom of the product.

The HONEYWELL ML6161B203 24VDC DIRECT-COUPLED NON-SPRING RETURNS NEMA 4X 304 STAINLESS STEEL OBJECT DETECTOR WITH MUTE AND TRANSFER SECURITY FEATURES AVAILABLE IN STAINLESS STEEL, D.O.M. CAST BRONZE OR ALUMINUM ALLOW OPTIMAL DETECTION OVER WARM AND COLD CONDITIONS WITH A RISE TIME OF LESS THAN 2.3 SECONDS (CORRECTION: MODEL NUMBER FOR 24VDC

The ML6161B203 is an indoor wall-mounted thermostat with a self-contained non-compressible liquid refrigerant circuit and it is for use with 24V direct-coupled non-spring return split system air conditioning equipment.

The 4-wire, 24V DC Direct-Coupled Reed Switch is specifically designed for ease of installation and maintenance. Installation on non-spring return applications, such as door and drawer closures, is simplified because of the direct coupling feature. With no external wiring or reed relay required in these applications, it has a long service life.

The 24V Honeywell 5800C non-spring direct-coupled turbo air compressor is designed for applications that require low vibration, quiet operation and dependable performance. The non-spring direct-coupled compressor allows the use of consistent, reliable rotary lobe and scroll vanes without the need for a mechanical clutch or pressure switch. These compressors are ideal when you need a system that will operate at or near full capacity at zero load.

Setpoint's non-spring models have been the standard in the industry for years and are the product of choice for HVAC design engineers. The "direct-coupled" non-spring allows the motor to respond rapidly without a performance penalty compared with springs, which resist shaft rotation. With more capability and flexibility than other products on the market, it is a smart choice in today's residential and light commercial applications.

The ML6161B203 is a 24V, non-spring return valve that replaces spring-return models throughout the system to provide reduced noise and increased durability in irregular applications. It features an integral pressure switch with built-in filter, international on/off ratings, a pilot-operated check-valve as standard, and low voltage magnetic actuation.