Honeywell 10633 24V DIRECT-COUPLED NON-SPRING RETUR

24V DIRECT-COUPLED NON-SPRING RETUR

The Honeywell 10633 - 24V DIRECT-COUPLED NON-SPRING RETUR requires a minimum of 24 Volts DC input and provides 0~20 Amps DC output. The output current has a maximum rating of 40 Amps, minimum rating of 0 Amps and a nominal rating of 20 Amps. This device performs the function of a non-retur

Honeywell's 10633 24V DIRECT-COUPLED non-spring return valve is the ultimate choice in the 24V DIRECT-COUPLED non-spring return valve world. Lasting for 50000 cycles and featuring a duty cycle of 2/70, this product proves to outlast its competitors.

The 10633 24V DIRECT-COUPLED NON-SPRING RETURN is a 12-38V direct coupled non-spring return valve used to synchronize start and stop for gas equipment. When the input leads are open, this valve supplies gas to the downstream equipment. The high pressure regulator has been replaced with a high pressure shutoff device and an internal ball check valve; both characteristic of Honeywell's products. A common application is and air compressor that remains running until the system depressurizes. According to Honeywell this valve can offer customers greater savings in energy, longer equipment life, quiet operation and

The 10633 24V DIRECT COUPLED NON-SPRING RETURN TO CENTER INDICATOR is a standard device, wired to a control circuit to indicate if the motor returns to center. The sensor has a ¼" quick connect, and an adjustable terminations point for easy installation. The sensor is 2" in length, with a terminating white nylon insulator.

The Honeywell 10633 24V DIRECT-COUPLED is a centrifugal method air flow switch with normally closed contacts. This non-spring return, direct coupled flow switch has a multi-vane impeller design that reduces wear and tear on the motor and maximizes energy efficiency.

The Honeywell Direct-Coupled Non-spring Return Variable Air Volume (VAV) Air Curtain has been engineered for superior performance and energy savings. Honeywell designed this unit with all of the most up to date features that a serious air curtain demands. The SLEEK housing design incorporates a compact size to fit in tight locations. With non-corrosive, DZR pre-coated tempered glass tube, and convertible mounting brackets that allow the unit to be installed at either 90° or 180° angles, it comes with it all.

Honeywell Distribution Inc. is introducing an innovative new product to the Contractor market, a direct coupled non-spring return that operates at 24 volts DC, the DW907. This direct coupled pull station provides both primary and backup safety. Using this combination, the contractor is able to meet most fire code requirements with a primary fire alarm system.