Honeywell 57385 24V DIRECT COUPLED NON SPRING RETUR

24V DIRECT COUPLED NON SPRING RETUR

Honeywell's 24V DIRECT COUPLED NON SPRING RETUR HVAC Fan Control is designed to control the amount of air flow in a heating or cooling system. It directly controls the fan speed without any spring action. This non-spring return fan control saves energy with its accurate fan speed modulation.

Get the replacement you need right now with Honeywell 57385 24V DIRECT COUPLED NON SPRING RETUR isolator. 0% Financing. Fast Shipping. 30 Day Money Back Guarantee. 365 Day Warranty.

Honeywell 57385 - 24V DIRECT COUPLED NON SPRING RETU

Honeywell's new 24V DIRECT COUPLED NON-SPRING RETURNS are ideal for applications requiring full, precise opening and closing capabilities with no spring return involved. Direct coupled closure assemblies deliver extended life and consistent operation. Operating in the closed position, the closure assembly is held locked by means of a switch/microswitch built into the actuator arm. When the actuator arm is pushed, the internal linkage is designed to release the closure assembly keeper pin and allow the cover to open. The closed position has a force required of over 90 lbs., giving greater assurance that the closure assembly will not be

The Honeywell 57385 24V DIRECT COUPLED NON SPRING RETURN DIAPHRAGM VALVE is a field convertible, direct coupled, valve designed to provide uninterrupted flow in severe industrial service applications. The springless diaphragm assures positive shut off and performance does not vary with pulsating or fluctuating loads. This two-way, normally closed valve requires no special maintenance. The seat is constructed of monel for hardness and durability. The chromium plate not only gives beauty to the valve but also a source of sealing against a wide range of materials.

This non-spring direct coupled return acts as an air supply damper for use with the 24V direct coupled valves.

DESCRIPTION: The 57385 is a Direct Coupled Non-spring Return operated actuator. This actuator has a 2" stroke and 1.25 N•m (10 in. lb) operator force. The metal gear is zinc plated steel and the shaft is 303 stainless steel. The handle is PBT material with a baked epoxy finish. Connections are industry standard BSP/NPT threads and the output shafts are hard wired with terminations.