Honeywell 190361 24V Floating or (0)2-10 Vdc (4-20 m

24V Floating or (0)2-10 Vdc (4-20 m

The 24V Floating or (0)2-10 Vdc (4-20 mA) Digital Temperature Controller is designed to monitor and control the temperature of a variety of heating devices. The controller features single/two-wire temperature probes, fail-safe operation, and a room thermostat that provides two stages of output at both high and low levels.

This 24 Volts DC, 4-20 milliamps solar system includes a flexible solar panel, a built-in regulator and rechargeable sealed rechargeable battery. The compact system measures only 7" x 5" x 1". It Includes MC4 Solar panel cables with waterproof connections to connect the panels to the battery and charge controller.

The large float switch delivers up to 45 amps, 120VAC or 240 VAC, 50Hz/60 Hz for converting water level in wells to 24 Vdc. Switch has a nylon guarded metallic paddle that floats in well tubing. The 78-4 threaded base of the switch is easy to install in plastic or metal well tubing having an outside diameter of 3/8 inch to 1 inch.

The versatile and powerful 4-20 mA H5132-U has both analog and RS-485 outputs for proportional or on/off control. When used in 32-point controller applications, the H5132-U can be configured to work as either a single output controller or an 8-output module. A 4-20 mA loop powered module, the H5132-U’s voltage output is ideal for controlling boilers, pumps, motors and solenoids. Its simple configuration requires no wiring fussing while its cost-effective price makes it an economical choice - even for applications that require redundant

The Honeywell SS64T1002 (190361) 24-Volt Waterproof Security System is used for outdoor area of protection. This system is made up of a control panel and accessories. The product is also available with brass terminals.

The L9200A24V4X2L-RF is a 24 VDC, 2.5 A AC magnetic low voltage detector with load disconnect switch for monitoring control power and supervising alarm contacts. It is designed for sensing the flow of a conductor coil through a ferrous metal or iron core. The L9200A has a minimum detection of 2 A and an operating frequency range of 10 to 200 Hz . The L9200A is the positive transmitter in the form of pulsed direct current (pdc). It cannot be utilized as an AC magnetic low voltage detector.

A 10 ft. tow and work light designed for commercial applications, there are a variety of features including an circuit board with test and protection circuitry, changeable panel, operator selectable strobe or worklight mode operation, and housing is an extruded aluminum alloy with an epoxy coating