York S1-024-19082-740 24V Heat Sequencer Relay 24V Heat Sequencer Relay

24V Heat Sequencer Relay

The S1-024-19082-740 is the product that meet the requirement of project for 24V Heat Sequencer Relay.

The 24V Heat Sequencer Relay is a solid state relay with single pole, dual throw (SPDT) selector. It provides an isolation and transient protection for any 24V Heating and Cooling application. The relay has a low voltage control signal, manual changeover selector and an indicator light.

YORK S1-024-19082-740 24V Heat Sequencer Relay

The York S1-024-19082-740 24V Heat Sequencer Relay is a heat sequencer relay that operates on 240V AC. The heat sequencer relay allows for six heating circuits to be controlled by a single timer contact. There are four timers that operate the off times, and two timers that operate the on times. Each timer is independently adjustable from 1second to 999 minutes with the ability to hold them in place for continuous operation.

The S1-024-19082-740 is a 24 Volt Heat Sequencer Relay. The relay switches 1, 2 or 3 stages of heating elements which are controlled by 24 Volt DC power.

This heat sequencer relay board plugs into the heat controller receptacle of an oil filled heater, to switch individual heater segments on and off. Mounted on a 3.5" by 2" heatsink, it is built with the following specifications: 24 VAC/VDC powered, 0-20 Amp voltage rating, 15 Amp current rating …

The S1-024-19082-740 is a 24VAC, single phase heat sequencer relay with manual reset. It allows the heaters to run until the temperature goes below a preset limit and it can also be used for home thermostats. This relay features a Normally Closed contact. Specifications: AC voltage: 100 - 230VAC Current: 2A @ 230VAC Max Switching Time: 1mS