ICM CONTROLS

3-PHASE MOTOR PROTECTOR ProgramableICM Controls' 3-Phase Motor Protector can provide not only power interruption protection, but also trigger a variety of alarms to help monitor the status of your...

VARIABLE FREQUENCY & VARIABLE VOLTAGE, DRIVE MOTORThis variable frequency (controlled by the drive unit) and variable voltage (controlled by the external VARIABLE VOLTAGE & FREQUENCY CONTROL or...

"10MIN ADJ W/6""WIRE DLY ON BRK""10MIN ADJ W/6""WIRE DLY ON BRK"Add a 0.03 to 10 minutes adjustable timing delay on break circuit on your existing appliance. Leads are 6" long with spade terminals...

The ICM Controls ICM255 PostPurgeFanDelay 1/180sec is a 1/180sec delay timer for the ICM255 purge fan.

PSC 1ph 1/2-10hp HardStartKit3ICM Controls PSC 1ph 1/2-10hp HardStartKit3. With 300% Torque Multiplier. Hard start kit for ICM PSC and ICP PSC 3 phase motors.The Hard Start Kit works to prevent...

"1-1Model: ICM103 "1-1 "1-1. Powerful 400W 2100mA system resonant frequency can be tuned to the key frequency of the power supply, to achieve maximum radiation efficiency and broad bandwidth. Most...

The ICM104 Delay-on-Make Timer with 10-1,000 seconds Adjustable Time Delay and SPDT Relay Output, 18-30 VAC is a timer that can be used to delay the start of a task. The timer has an adjustable time...

"1STG HT/CL OR HT PMPICM Controls SC2010L Thermostat, 1-Stage Heat/Cool or Heat Pump, Backlit, Dual Power ?ICM's SC2010L is a 1-stage digital non-programmable thermostat that is ideal for replacing a...

STANDARD COIL SENSOR FOR CC750Standard coil sensor for model CC750.This standard coil sensor for ICM Controls' CC750 is used for a wide variety of different central air conditioning units. The CC750...

This is an OEM replacement fan blower control for the ICM271 air conditioner. This part is a replacement for the HH84AA020 carrier. This part is a direct replacement for the original part and is a...

"2stage1H/1CThe ICM Controls SC5811 2stage/1H/1C programmable thermostat provides you the convenience and time savings of using pre-programmed temperatures. The two stage program allows you to set...

The ICM Controls ACC-WP03 Large, Universal Wallplate is a large, insulated wallplate that is 5 3/4" H x 7 1/2" W. This wallplate is designed to fit most standard wall openings and is made of durable,...

The ICM Controls ICM203 Delay-on-Break Timer with 0,03 minutes-10 minutes, Adjustable Time Delay, Universal 18 VAC-240 VAC is a timer that allows you to set a time delay before the power is turned...

The ICM206 Delay On Break Timer is a 4 terminal timer with 10 minutes fixed timing. It can be used to delay the start of a process or to control the timing of a process.

The ICM283 Repl HSI Module is a replacement for the ICM283 HSI Module. This module allows you to connect to and control the HSI functions of an ICM283 controller from a PC.